МОП-ТРАНЗИСТОРЫ
| High-Speed MOSFET Driver | |||||||
|---|---|---|---|---|---|---|---|
| Part No. | Features | Vcc | Icc(Max) | Iout(Peak) | tD Max | tR Max / tF Max | Package |
| US2829 | Single-Channel High-Speed MOSFET Driver | 4.0V~14.0V | 15uA | 2A | 40nS | 25nS / 25nS | SOT-25 |
| * Low-cost single-channel high-speed MOSFET driver | |||||||
| * 2A peak output current | |||||||
| * 25ns max rise/fall times and 40ns max propagation delay,1nF load | |||||||
| * Low power dissipation: ICC=15μA(Max) | |||||||
| UTC4424 | 3A Dual High-Speed Power MOSFET Drivers | 4.5V~18.0V | 2.5mA | 3A | 75nS | 35nS / 35nS | DIP-16 SOP-16 |
| * Power supply voltage: 4.5V to 18V | |||||||
| * High Capacitive Load Drive Capability: 1800pF in 25 ns | |||||||
| * Short Delay Times: <40 ns (typ) | |||||||
| * Low Output Impedance: 3.5Ω (Typ.) | |||||||
| UGD9511 | SINGLE-CHANNEL, | 4.5V~18.0V | 160uA | -4A/+8A Source/Sink | 30nS | 22nS / 11nS | SOT-26 |
| HIGH-SPEED, LOW-SIDE GATE | |||||||
| DRIVER | |||||||
| * Low-Cost Gate-Driver Device Offering Superior | |||||||
| Replacement of NPN and PNP Discrete Solutions | |||||||
| * Strong Sink Current Offers Enhanced Immunity against | |||||||
| Miller Turn on | |||||||
| * Split Output Configuration (Allows Easy and | |||||||
| Independent Adjustment of Turn on and Turn off | |||||||
| Speeds) in the UGD9511 Saves 1 Diode | |||||||
| * Fast Propagation Delays (13-nsTypical) | |||||||
| * Fast Rise and Fall Times (9ns and 7ns Typical) | |||||||
| * 4.5V to 18V Single Supply Range | |||||||
| * Output Held Low When Input Pins Are Floating | |||||||
| * Outputs Held Low During VDD UVLO (Ensures | |||||||
| Glitch-Free Operation at Power Up and Power-Down) | |||||||
| * TTL and CMOS Compatible Input-Logic Threshold | |||||||
| (Independent of Supply Voltage) | |||||||
| * Hysteretic-Logic Thresholds for High-Noise Immunity | |||||||
| * Dual-Input Design (Choice of an Inverting (IN–Pin) or | |||||||
| Non inverting (IN+ Pin) Driver Configuration) | |||||||
| Unused Input Pin can be Used for Enable or Disable | |||||||
| Function | |||||||
| * Input Pin Absolute Maximum Voltage Levels | |||||||
| UTR2101* | HALF-BRODGE DROVER | 10V~20.0V | 270uA | 600V(VHO) | 90nS | 170nS / 90nS | SOP-8 |
| * Floating channel designed for bootstrap operation | |||||||
| * Fully operational to +600V | |||||||
| * Tolerant to negative transient voltage, dV/dt immune | |||||||
| * Gate drive supply range from 10V to 20V | |||||||
| * Undervoltage lockout | |||||||
| * 3.5V, 5V, and 15V input logic compatible | |||||||
| * Matched propagation delay for both channels | |||||||
| * Outputs in phase with inputs |